Compact Console

5MT Series C - Input Modules

Dual automated Inline Module

CO5-C

The CO5-C Inline Input Module has the same basic structure as the CO5-E; however many additional features are implemented. It combines the same pristine transformer mic pre that is used with all modules of the Series C with a 4 band split EQ with 3 fully parametric bands. Of course, sweeped high-pass and low-pass filters and a switched insert section, pre or post the EQ is included.Each processing device can be switched either to the tape/monitor chain or two the record chain independently. The two signal chains, TAPE and REC, are totally independed and make possible to use the unit for recording and monitoring at a time. The REC input can feed the main stereo master bus while mixing. There are 6 mono auxilliaires and a stereo cue send. In addition, aux 6 can be used to build additional aux sends with the routing system. The fader section of the CO5-C is dual automated. Both the 100 mm main fader and the 60 mm short fader are automated. Each fader section has its own set of assinged control, like Cut, Solo, PFL and peak present indicator.